Case & Internal Parts (Apple II)

All Categories » Apple II Computers & Parts  » Case & Internal Parts (Apple II)

Apple II Foot Feet (Black)

II, II Plus, IIe, Unidisk, DuoDisk, Disk II, Monitor II

Additional DescriptionMore Details

These feet are used on the Apple II, II Plus, IIe, Unidisk, DuoDisk, Disk II, Monitor II, and possibly other Apple II peripherals.
New feet are sold as a set of 4 or individually. Used feet are sold individually only. The used feet will need some kind of contact or spray adhesive to attach. New feet have an adhesive backing.

Product Options
Combination of product variants is not available
Product in stock

Price: from $1.25

Loading Updating cart...

Apple II Series Internal Speaker

II, II Plus, IIe, IIGS

Additional DescriptionMore Details

Internal Speaker for the Apple II, II Plus, IIe, IIGS. Approx 2 - 1/4" in diameter, this speaker will work for many different computers

Product in stock

Price: $10.00

Loading Updating cart...

Apple II+ IIe Power Supply

Out of stock

Switching

Additional DescriptionMore Details

This Power Supply will work in the Apple ][ Plus and //e. With some modifications, I understand it will also work in the ][. Apple part numbers include 699-0133, 699-0136, 606-5001, 605-5703, 825-0510-A and others as I come across them. Power supplies may be made by Astec or Dyna Comp. They may be gold / bronze as pictured or silver and may have ventilation holes. The Power Supply that you receive may be any of the above.

Product not in stock

Price: $34.99

Apple IIe Base Assy

Regular or Platinum

Additional DescriptionMore Details

The case, base and lid differed among all versions of the Apple IIe.

The IIe Base Assy includes 4 feet, the speaker and fastener, the motherboard standoffs, keyboard brackets on #1 and #2, RFI strip on #2 through #4, and motherboard bumpers on #4 only. Everything is also sold separately except the non removable keyboard brackets.

Select below from the following:

1) The earliest IIe's used 4 screws across the front as well as 2 screws in the back panel. Keyboard bracket on the base. Brown bottom, back panel and standoffs.

2) Front screws were reduced to 3, gone were the screws in the back panel, and an RFI strip was added. Keyboard bracket remained on the base. Brown bottom, back panel and standoffs.

3) Keyboards now attached to the underside of the lid, so no more brackets. Otherwise the same as #2. Brown bottom, back panel and standoffs. (Very late models may have 3 rubber motherboard bumpers, but not currently available.)

4) Same as #3, and completely interchangeable but this was for the Platinum (extended keyboard model), so gray bottom, back panel, and standoffs. A minor variation was the holes above the feet became round instead of square at some point with this version, so you may receive either. Also, this base has 3 rubber motherboard bumpers.

Product Options
Combination of product variants is not available
Product in stock

Price: $25.00

Loading Updating cart...

Apple IIe Case and Lid

Regular or Platinum

Additional DescriptionMore Details

The case or housing, base and lid differed among all versions of the Apple IIe

Case #1. Painted beige (almost off white) case. Mesh strip and velcro on lid along with 2 badges - Apple & //e, 4 screws across the front as well as 2 screws in the back panel. The keyboard mounted to a bracket on the base. (first pic)

Case #2. Beige dyed plastic, RFI strip on the back wall stuck up through the case and the lid just snapped on. 2 badges on the lid remained - Apple & //e. 3 screws across across the front. The keyboard mounted to a bracket on the base. (pic 2 and 3)

Case #3. Same as #2 except the keyboard brackets on the base are gone and the keyboard now fastened to the underside of the case. (pic 2 and 4)

Case #4. Platinum case and extended keyboard. Lid has printed Apple //e instead of badges. An Apple emblem is on the right side of the case above the keyboard. The keyboard light also changed location. (pics 5 and 6)

***Photos are for illustration only. For better coloring examples, see the regular IIe or platinum IIe pages***

All will have some minor scuffs, scrapes or scratches. Many have had marker or stickers removed, resulting in lighter areas. These are sold as a set unless something was broken or unusable resulting in a stray lid or case. Cases have the screw clips attached.

Select below from the following:

A) Beige IIe (Case #3 - keyboard screws to the case) w/lid. Evenly colored with medium to severe discoloration. There is a lighter arc on the lid. (2nd photo)

B) Platinum IIe (Case #4) w/lid. Light discoloration overall with the lid and left side medium. Engraving on right side towards the front

C) Platinum IIe (Case #4) w/lid. Light discoloration overall. Scrapes on the front raised part of case.

D) Platinum IIe (Case #4) w/lid. Medium discoloration overall with severe on the right side. Also marker and sticker removed from right side.

E) Platinum IIe (Case #4) w/lid. Medium to severe discoloration overall. Stickers removed from left side. Marker removed from lid and right side. Some scrapes on raised front part of the lid and case.

F) Platinum IIe Lid only (for Case #4). Light to medium discoloration overall. Marker has been removed. *While this lid will physically fit on case #2 or #3, the fundamental plastic is a different color.

Product Options
Combination of product variants is not available
Product in stock

Price: from $10.00

Loading Updating cart...

Apple IIe Case Screw Clips

Rebuilding or Retr0brighting your //e and lost one of these?

Additional DescriptionMore Details

These clip on to the bottom of the plastic Apple IIe case to hold the screws inserted through the base.

Most //e's have 9 clips, very early models had 10. Sold individually only.

Product not in stock

Price: $1.00

Apple IIe Case Screws

Lost your screws?

Additional DescriptionMore Details

The brown/black case screws are for the regular IIe with the brown bottom. The silver screws are for the Platinum IIe with the gray bottom.

The very early ][e's used a total of 12 case screws, all later models used 9.

Sold individually only.

Product Options
Combination of product variants is not available
Product in stock

Price: $2.00

Loading Updating cart...

Apple IIe Emblem or Badge

 Apple //e

Additional DescriptionMore Details

This 2 piece set comes from the lid of a beige Apple IIe.

Sold as a set or individually.

Also available is the Apple rainbow logo from the Platinum IIe (Apple IIe on this model was printed on the lid).

These are all used and have been removed as carefully as possible, so don't expect new condition. They will likely have minor scratches, etc.

Product Options
Combination of product variants is not available
Product in stock

Price: from $10.00

Loading Updating cart...

Apple IIe Keyboard Screws

Replace your missing screws.

Additional DescriptionMore Details

These screws are used for all Apple IIe's, regular and Platinum, keyboards that are attached to the underside of the cover. Sold individually only.

The screws used on the early keyboards that are attached to the brackets inside the case are the same as the brown case screws.

Product in stock

Price: $2.00

Loading Updating cart...

Apple IIe Motherboard Bumpers

Out of stock

How did that come off?

Additional DescriptionMore Details

These were added to the later Apple IIe's for added support under the motherboard, I assume. I have seen them on all the Platinum IIe's. Probably the 1986 and later motherboards for the regular IIe's as well.
Sold individually only.

Product not in stock

Price: $1.00

Apple IIe Motherboard Clips ~ Standoffs

Keep your motherboard safely tied down but suspended.

Additional DescriptionMore Details

These are the standoffs that hold your //e motherboard off of the bottom of the case. Regular IIe's use the brown clips and Platinum IIe's use the gray clips.
Sold as a set of 6 or individually.

Product Options
Combination of product variants is not available
Product in stock

Price: from $2.00

Loading Updating cart...

Apple IIe Motherboard Screws

Out of stock

Lost a screw?

Additional DescriptionMore Details

These screws, in conjunction with the standoffs, hold the motherboard of the IIe down. They are located at the back, by the ports.

Sold as a set of 4 or individually.
Note: The brown screws are pretty rare and are very early //e.

Product Options
Combination of product variants is not available
Product not in stock

Price: from $2.00

Apple IIe Platinum Keyboard Clip

Where does this thing go?

Additional DescriptionMore Details

Keyboard clip for the Apple IIe Platinum extended keyboard only! I am not certain exactly what the purpose of this clip is, perhaps as a ground?

Product in stock

Price: $2.50

Loading Updating cart...

Apple IIe Port Covers

Keep the dust away.

Additional DescriptionMore Details

Cover those unused port holes on your Apple IIe. Rectangular port openings are numbered 1 through 12. Openings 1 through 4 are Medium size; 5, 6, 8, and 9 are Small size; and 7, 10, 11,and 12 are Large size.
Sold individually. Available in Brown for the regular //e or Gray for the Platinum.


Note: Some of the gray covers will show some of the same discoloration that the cases do.

Product Options
Combination of product variants is not available
Product not in stock

Price: $3.00

Apple IIe Power Supply Screws

Out of stock

Lost your screws?

Additional DescriptionMore Details

The brown/black power supply screws pictured are for the //e with the brown bottom. The silver screws are for the Platinum //e with the gray bottom.

Set quantity is 4 screws.

Product Options
Combination of product variants is not available
Product not in stock

Price: from $2.00

Apple IIe RFI Strip

Located at the top of the back, under the lid.

Additional DescriptionMore Details

Radio Frequency Interference strip for the all but the earliest IIe case. The first IIe used mesh on the lid for this strip along with a mesh strip on top of the front of the lid.

Product in stock

Price: $5.00

Loading Updating cart...

Apple IIe Speaker Fastener

Tie down wires

Additional DescriptionMore Details

Wire to fasten the speaker to the bottom of the Apple IIe case.

The square hold-down is standard for most //e's and Platinum IIe's, the 2 piece set is for the very early //e's.

Product Options
Combination of product variants is not available
Product in stock

Price: $2.00

Loading Updating cart...
LoadingUpdating...

All Categories » Apple II Computers & Parts  » Case & Internal Parts (Apple II)